Short answer
Net area is the usable area between the inner faces of the walls enclosing a space; gross area is measured from the outer faces, walls included. For example, a room measuring 4.00 × 5.00 m inside has a net area of 20.00 m²; measured from the outside with 20 cm walls, the same room is 4.40 × 5.40 m, i.e. a gross area of 23.76 m². In ARCTE CAD you measure net area from a closed boundary and totals from selected closed objects.
What are net area and gross area?
Net area is the floor area that can actually be used inside a space: the area between the inner faces of the walls. Room schedules and interior quantity take-offs usually use net area.
Gross area is the area measured from the outer lines of the building or floor, walls included. It appears often in floor and building totals, cost estimates and sales documents.
| Net area | Gross area | |
|---|---|---|
| Measured from? | The inner faces of the walls | The outer faces of the walls |
| Walls included? | No | Yes |
| Commonly used in | Room schedules, interior take-offs | Floor and building totals, cost estimates |
Which areas (such as balconies, stairs, common areas) count, and how, in zoning, floor area ratio and sales documents is set by the applicable legislation. This guide explains the general measuring method; it does not replace the official calculation.
Worked example
Take a room with internal dimensions of 4.00 m × 5.00 m, enclosed on all four sides by 20 cm thick walls.
| Calculation | Dimensions | Result |
|---|---|---|
| Net area | 4.00 m × 5.00 m | 20.00 m² |
| Gross area (walls included) | (4.00 + 2 × 0.20) m × (5.00 + 2 × 0.20) m = 4.40 m × 5.40 m | 23.76 m² |
| Area taken up by walls | 23.76 − 20.00 | 3.76 m² |
In real plans, adjacent spaces share a common wall; so the gross floor area is not the sum of the rooms' gross areas. Measure the gross floor area once, from the outer line of the floor.
To measure correctly
- Measure the area from the closed boundary in the drawing rather than multiplying by hand; recesses, projections and angled walls are easily missed in a manual calculation.
- Check the unit of measurement: in a plan drawn in millimetres, 1 m² = 1,000,000 mm².
- Decide whether solid elements inside a space, such as columns, shafts and flues, are subtracted from the net area, and apply the same rule in all rooms.
- Adding the area taken up by walls to the sum of the rooms' net areas should bring you close to the gross floor area; a large difference points to an unclosed boundary or a missed space.
Net and gross area with ARCTE CAD
01Measure the net area of the rooms
Select the surrounding walls and type
ROOM Lounge, or useROOMAT 2000,1500 Loungewith a point inside the closed area. The net area is calculated from the inner faces of the walls and written on the plan.02Keep unnecessary lines out of the calculation
Use
ROOMLAYERSto stop furniture layout, grid line and title block layers counting as boundaries; otherwise furniture lines can reduce the area.03Draw the outer line for the gross area
Draw the outer line of the floor as a closed polyline (
PLINE) and measure it with theAREAcommand. AREA gives the total area of the selected closed objects; overlapping areas are not subtracted.04Verify distances
Check a known dimension with
DIST. In plans from DWG, a wrongly chosen unit makes areas appear 100 or 1,000,000 times off.05Update after changes
Areas are linked to their boundaries.
RELATIONSlists the areas that need updating; while an out-of-date area exists, PDF and DXF output is stopped.
Frequently asked questions
Each room's row usually gives the net area. The gross area can be given separately in the floor or building total.
No. Because adjacent spaces share common walls, adding them up counts the walls twice. Measure the gross floor area once, from the outer line of the floor.
Room areas are written on the plan in m². The drawing is millimetre-based; for plans from DWG you need to choose the source unit correctly.