Get a short email when a new version is released.
mm-based
Get the drawing right from the start with a millimetre-based workspace, object snaps, dynamic input and aligned dimensions.
Appears next to the cursor while you type a command or use an interactive tool; it does not clutter the screen when idle.
Quick snapping to endpoints, midpoints, intersections and perpendicular points; settings are saved permanently.
Place distance and aligned dimensions on the plan in millimetres.
01Check the unit
UNITS sets the working unit and the display precision of numbers. The drawing area is millimetre-based.
02Turn on snaps
Object snap (F3) snaps to endpoints, midpoints, centres and intersections; you can choose the types individually with DSETTINGS.
03Lock directions
Ortho (F8) gives horizontal and vertical lines, polar tracking (F10) gives nearby angles in 15-degree steps, and object tracking (F11) aligns to snapped points.
04Draw by value
Dynamic input (F12) shows the distance next to the cursor. Enter coordinates as X,Y and values relative to the last point with @: MOVE @0,200.
05Add dimensions
Use DIMLINEAR for horizontal and vertical dimensions and DIMALIGNED for angled edges. Dimensions are linked to their end points; when the geometry changes, RELATIONS shows which need updating.
06Check
DIST gives the true distance between two points.
| Command | Turkish name | What it does | Example |
|---|---|---|---|
UNITS | — | Working unit and number display precision | UNITS |
OSNAP | nesne yakalama | Endpoint/midpoint/centre/intersection snaps — F3 | OSNAP |
DSETTINGS · SNAPSETTINGS | — | Object snap settings with icons; select types individually, clear all, or turn off temporarily with F3 | DSETTINGS |
ORTHO | dik çizim | Orthogonal direction lock — F8 | ORTHO |
POLAR | açı izle | Snap to nearby angles in 15-degree increments — F10 | POLAR |
OTRACK | — | Alignment tracking from snapped reference points — F11 | OTRACK |
DYNAMIC | dinamik giriş | Dynamic distance at the cursor — F12 | DYNAMIC |
DIMLINEAR · DLI | doğrusal ölçü, ölçü | Horizontal/vertical dimension; two endpoints + normal offset + H/V (optional); associated with the endpoints | DIMLINEAR 0,0 3000,4000 4500 H |
DIMALIGNED · DAL | hizalı ölçü | Aligned true distance; two endpoints + perpendicular offset; associated with the endpoints | DIMALIGNED 0,0 3000,4000 500 |
DIST · DI | mesafe | Distance between two points | DIST 0,0 3000,4000 |
All commands: CAD commands guide.
Give grid line and overall dimensions with dimensions linked to their end points; out-of-date dimensions are flagged when the geometry changes.
Place furniture and fittings with millimetre accuracy using relative coordinates and object tracking.
Verify the scale of an incoming DWG against a known distance.
Dimensions are linked to their end points. When the geometry changes, the dimensions that need updating are listed with RELATIONS; PDF and DXF output is stopped while any dimension is out of date.
Absolute coordinates use the X,Y format (e.g. 1000,2500); for a value relative to the last point, prefix it with @ (e.g. @0,200). Use a full stop as the decimal separator.
F3 object snap, F7 grid, F8 ortho, F9 snap to grid, F10 polar tracking, F11 object tracking, F12 dynamic input.
6 min read
How are outer and inner dimension strings, grid dimensions and levels given on a floor plan? Associative dimensions in CAD, angled walls and checking dimensions when the geometry changes.
6 min read
What do architectural drawing scales mean, which sheet is drawn at which scale, and how is scale set in CAD? Scale table, text height and common mistakes.
9 min read
The command names that work on the ARCTE CAD command line, in Turkish and English, with aliases, example syntax and keyboard shortcuts in one table.
Take the existing measured survey from DWG, measure the rooms and draw the layout precisely.
Get started quickly, from installation to your first plan, with a Turkish interface, a Turkish command flow and focused tools.
Draw walls, doors and windows as linked architectural objects.
Feature details: Walls and openingsDetect closed boundaries and write the room name and m² area on the plan.
Feature details: Rooms and areasOpen your existing DWG projects and export them as DXF.
Feature details: DWG and DXF exchangeDownload the installer, or choose your plan and get started right away.