Get a short email when a new version is released.
Linked openings
Build your floor plan from related objects rather than a pile of lines, with double-line walls, wall-hosted doors and windows, and thickness control.
Doors and windows sit inside the wall; when the wall is moved, the opening stays attached.
Create walls and openings from existing single lines or DWG lines.
Set the wall thickness in document units; architectural elements stay organised on their own layers.
Scope note. The door and window type catalogue is being expanded; the range of symbols and parameters for each family will grow in future releases.
01Choose the wall thickness
Set the thickness of new walls with WALLTHICKNESS 20cm; pick one of the preset sizes or type a custom value in cm.
02Draw the walls
Type WALL and click points, or enter coordinates: WALL 0,0 5000,0 200 (start, end and thickness in mm). Junctions are formed as L, T and X connections.
03Create walls from existing lines
If you have a single-line plan, select the lines and type WALLFROM 200 CENTER; to create a wall from two parallel lines, use WALLPAIR. The source lines are kept.
04Place doors and windows
Type DOOR 900 or WINDOW 1400 and click the centre of the opening on the wall. The opening is attached to the wall.
05Check the junctions
AUDIT checks the wall geometry and the L/T/X connections. An open junction prevents the room area from being detected.
06Convert DWG plans
For plans opened from DWG, DWGNATIVE creates native walls, doors and windows from the geometry; you then edit the plan with ARCTE CAD objects.
| Command | Turkish name | What it does | Example |
|---|---|---|---|
WALLTHICKNESS | — | Thickness for new walls; preset sizes from the drop-down arrow or a custom value in cm | WALLTHICKNESS 15cm |
WALL · W | duvar | Centreline, thickness and an optional label | WALL 0,0 5000,0 200 lounge north |
WALLFROM | — | Creates walls from the selected straight lines and keeps the sources. Thickness and CENTER/LEFT/RIGHT reference | WALLFROM 200 CENTER |
WALLPAIR | — | Creates a wall from two aligned LINEs or the offset faces of matching closed, straight-edged PLINEs; keeps the sources | WALLPAIR |
DOOR · DR | kapı | Type KAPI, then click the door centre on an existing wall. ID form: DOOR wallId distance width | KAPI 900 |
WINDOW · WIN | pencere | Type PENCERE, then click the window centre on an existing wall. ID form: WINDOW wallId distance width | PENCERE 1400 |
AUDIT | duvar denetimi, denetle | Check wall geometry and L/T/X junctions | AUDIT |
DWGNATIVE | — | Creates native walls, doors and windows from the geometry of a DWG-based drawing | DWGNATIVE |
MOVE · M | taşı | Move the selection by a relative offset; wall joins are kept | MOVE @0,200 |
COPY · CO | kopyala | Copy the selection together with its attached openings | COPY @1000,0 |
All commands: CAD commands guide.
Set up walls and openings quickly; as the plan changes, openings move with their wall.
When you move a wall (MOVE), its junctions and the doors and windows in it are preserved; there is no need to fix lines one by one.
Turn an old DWG or a single-line plan into architectural objects and measure the room areas.
Yes. Doors and windows are objects attached to the wall; when you move or copy the wall, the openings go with it.
The WALLTHICKNESS command uses cm (e.g. 15cm, 20cm); the coordinate and thickness values of the WALL command use mm. The drawing area is millimetre-based.
Yes. Select the lines and create walls with WALLFROM, or create a wall from two parallel lines with WALLPAIR; the source lines are not deleted.
8 min read
Draw a scaled floor plan step by step, from the grid to walls, doors and windows, dimensions and rooms; with examples using ARCTE CAD commands.
7 min read
How to carry out a measured survey of an existing building: measurement sketch, diagonal checks, levels and opening dimensions; transferring the measurements to a CAD plan and working with DWG surveys.
9 min read
The command names that work on the ARCTE CAD command line, in Turkish and English, with aliases, example syntax and keyboard shortcuts in one table.
From concept design to construction drawings, bring walls, openings, dimensions and rooms together in a single workspace.
Create employee accounts from one dashboard, manage licence terms and devices, and share projects in the cloud.
Get started quickly, from installation to your first plan, with a Turkish interface, a Turkish command flow and focused tools.
Detect closed boundaries and write the room name and m² area on the plan.
Feature details: Rooms and areasOpen your existing DWG projects and export them as DXF.
Feature details: DWG and DXF exchangeMillimetre-based drawing, object snaps and dynamic input.
Feature details: Dimensions and precision drawingDownload the installer, or choose your plan and get started right away.