Short answer
A scaled floor plan is prepared by setting up the drawing at real size (1:1, in millimetres) and printing it on paper at the required scale (e.g. 1:50 or 1:100). The usual order is: grid lines, walls, doors and windows, room names and areas, dimensions and text, and finally the sheet layout. In ARCTE CAD, walls, doors and windows are linked architectural objects, so when a wall changes, its openings move with it.
Scale first: 1:1 in the drawing, 1:50 on paper
In CAD, the plan is drawn at real size: a 5-metre wall is 5000 mm long. Scale is applied only when printing on paper. From the same drawing you can produce both a 1:100 general plan and a 1:50 construction drawing sheet.
| Scale | 1 cm on paper | Typical use |
|---|---|---|
| 1:200 | 2 m | Site plans and general plans of large buildings |
| 1:100 | 1 m | Preliminary design, general floor plans |
| 1:50 | 50 cm | Construction drawing floor plans |
| 1:20 | 20 cm | Detail plans such as wet rooms and kitchens |
Scale also sets the level of detail you draw: on a 1:100 plan, door leaves and wall thicknesses are enough; on a 1:50 plan, finish and joinery details are visible too.
Floor plan step by step
01Set up the drawing
Check that the unit is millimetres (
UNITS). Ortho (F8) and object snap (F3) help you join lines neatly.02Draw the grid lines
Draw the structural grid on a separate layer (
LAYER Grid, thenLINE). Grid lines are a reference when placing walls and should be kept out of the room area calculation.03Draw the walls
Choose the wall thickness (
WALLTHICKNESS 20cm) and draw the walls:WALL 0,0 5000,0 200. Wall junctions are formed as L, T and X connections;AUDITshows junctions left open. To create walls from existing lines you can useWALLFROM.04Place doors and windows
Type
KAPI 900(the Turkish command word for door) and click the centre of the door on the wall; for a window,PENCERE 1400. Openings are linked to the wall: when you move the wall, they move with it.05Name the rooms
For each space, write the name and net area on the plan with
ROOM LoungeorROOMAT.06Add dimensions
Give overall and grid dimensions with
DIMLINEARand angled edges withDIMALIGNED. Dimensions are linked to their endpoints; when the geometry changes,RELATIONSshows that they need updating.07Organise text, hatching and layers
Add notes with
TEXTorMTEXT; hatch the cut walls withHATCH. Keeping each type of element on its own layer makes it easier to manage lineweights in the output.08Set up the sheet and produce output
On the Layout tab, set the paper size, scale and margins, check in print preview and produce a vector PDF. Details are in the PDF sheet guide.
Suggested layer structure
Layer names vary from practice to practice; what matters is consistency. A simple starting structure:
| Layer | Content | Note |
|---|---|---|
| Grid | Grid lines and grid bubbles | Should not count as a room boundary (ROOMLAYERS) |
| Wall | Walls and columns | Heavy line |
| Door-window | Openings | Objects linked to the wall |
| Room | Room names and areas | |
| Dimension | Dimensioning | Fine line |
| Furniture | Furniture and fittings | Should not count as a room boundary |
| Hatch | Section hatching |
Common mistakes
- Drawing at paper scale: drawing everything divided by 100 for 1:100 corrupts dimensions and areas. Always draw at 1:1.
- Leaving wall junctions open: the room area cannot be found or two spaces merge.
- Drawing doors and windows with separate lines: when the wall moves, the opening stays where it was; place them on the wall object.
- Keeping furniture and grid lines on the same layer: the area calculation and output lineweights get mixed up.
Frequently asked questions
Always draw at real size (1:1, in millimetres). Choose the scale only when printing on paper; preliminary design usually uses 1:100 and construction drawings 1:50.
You choose the thickness of new walls with WALLTHICKNESS before drawing them; you can use one of the preset sizes or a custom value in cm (e.g. WALLTHICKNESS 15cm).
Yes. In ARCTE CAD, doors and windows are objects linked to the wall; when you move or copy the wall, the openings go with it.