Get a short email when a new version is released.
Automatic m²
Detect closed boundaries automatically and place the room name and its area in m² on the plan. Layer and boundary filters keep furniture, grid line and title block lines out of the calculation.
Finds the closed area around the point you click and labels it as a room.
For drawings from DWG, choose the source unit so that the area is calculated at the correct scale.
You decide which layers count as room boundaries.
Scope note. For complex drawings from DWG, verify the detected area against the source drawing.
01Make sure the boundaries are closed
Check the wall junctions with AUDIT. A room area can only be calculated from a closed boundary.
02Leave out unnecessary layers
Use ROOMLAYERS to make sure furniture, grid line and title block layers do not count as room boundaries.
03Measure and name the room
Select the surrounding walls and type ROOM Lounge, or use a point inside the area with ROOMAT 2000,1500 Lounge. The room name and its net area in m² are written on the plan.
04Get the totals
AREA gives the total area of the selected closed objects; overlapping areas are not subtracted. Verify distances with DIST.
05Keep it up to date
Areas are linked to their boundaries. When the geometry changes, RELATIONS lists the areas that need updating; RELINK relinks a room boundary to the closed region you click.
06Build the schedule
Set up the room schedule on the same sheet with the TABLE command; update cells with TABLECELL.
| Command | Turkish name | What it does | Example |
|---|---|---|---|
ROOM · RM | mahal, oda | Dynamic net area from the selected surrounding walls | ROOM Lounge |
ROOMAT | — | Net area of the closed room containing the point | ROOMAT 2000,1500 Lounge |
ROOMLAYERS | — | Set the source role of each layer for new room searches | ROOMLAYERS |
AREA · AA | alan | Total area of the selected closed objects; overlaps are not subtracted | AREA |
DIST · DI | mesafe | Distance between two points | DIST 0,0 3000,4000 |
RELATIONS | — | Show dimensions and areas that need reviewing | RELATIONS |
RELINK | — | Relink the selected room/hatch boundary to the clicked closed region; relink a dimension to its endpoints | RELINK 2000,1500 |
AUDIT | duvar denetimi, denetle | Check wall geometry and L/T/X junctions | AUDIT |
TABLE · TB | tablo | Grouped 2D table built from lines and editable text; columns separated by |, rows by ; | TABLE 0,0 3 4 1200 450 "Title|Qty|Unit|Note;Wall|1|m²|" |
TABLECELL · TBC | — | Change a row/column cell of the selected table; empty text clears the cell | TABLECELL 2 1 Wall |
All commands: CAD commands guide.
Take the net area of each space from the plan and transfer it to the schedule.
Compare the sum of the room areas with the floor area to find unclosed boundaries and missed spaces.
When the plan changes, out-of-date areas are flagged; PDF and DXF output is stopped while any area is out of date.
No. It measures the net area of the rooms and writes the name and m² value on the plan; you build the schedule yourself with the TABLE command.
The room area is the net area between the inner faces of the surrounding walls. For the gross area, draw the outer outline as a closed polyline and measure it with AREA.
The wrong source unit was selected. Choose the correct unit when opening the DWG and verify it by measuring a known distance with DIST.
7 min read
What goes into a room schedule, what is the difference between net and gross area, and how do you prepare one step by step? Sample table and how to do it in ARCTE CAD.
6 min read
The difference between net and gross area, where to measure from, a worked example and the ARCTE CAD steps for measuring areas correctly on a plan.
From concept design to construction drawings, bring walls, openings, dimensions and rooms together in a single workspace.
Take the existing measured survey from DWG, measure the rooms and draw the layout precisely.
Draw walls, doors and windows as linked architectural objects.
Feature details: Walls and openingsOpen your existing DWG projects and export them as DXF.
Feature details: DWG and DXF exchangeMillimetre-based drawing, object snaps and dynamic input.
Feature details: Dimensions and precision drawingDownload the installer, or choose your plan and get started right away.