Short answer
Layers are like transparent sheets that group the objects in a drawing by type (wall, door-window, dimension, text, furniture). Each layer is given a colour and lineweight; properties left as BYLAYER on objects come from the layer. That way you can hide or lock a group in one click and print it with the correct lineweight.
Why do layers matter?
- Visibility: you can hide the furniture layout and show only the walls, or turn dimensions on in a separate sheet.
- Output quality: cut walls print heavy, visible lines fine; you assign the lineweight to the layer rather than to individual objects.
- Safe editing: by locking the grid or underlay layer you prevent it from being moved by accident.
- Correct area calculation: in ARCTE CAD you decide, by layer, which layers count as boundaries in the room search.
- File exchange: layer names are kept in a drawing exported to DXF; the other party works with the same groups.
Sample architectural layer list
The list below is a suggested starting point; if your practice has a standard, follow it. What matters is that the names are short, consistent and understood by everyone.
| Layer | Content | Suggested lineweight | Note |
|---|---|---|---|
| GRID | Grid lines and grid bubbles | 0.18 mm | Dashed linetype; lock while drawing |
| WALL | Walls | 0.50 mm | Cut wall; the heaviest line on the plan |
| DOOR-WINDOW | Doors and windows | 0.25 mm | Door swings fine |
| ROOM | Room names and areas | 0.18 mm | The room schedule is read from this layer |
| DIM | Dimensions | 0.18 mm | Must be legible in the output |
| TEXT | Notes, levels | 0.25 mm | Text height according to scale |
| HATCH | Material hatches | 0.13–0.18 mm | Send to the back of the draw order (DRAWORDER BACK) |
| FURNITURE | Furniture and fittings | 0.18 mm | Must not count as a room boundary |
| TITLEBLOCK | Sheet border and title block | 0.35 mm | Layout only |
When exporting to DXF, the characters < > / \ " : ; ? * | = cannot be used in layer names; in that case ARCTE CAD stops the export and tells you which layer needs correcting. If you will share the drawing with other programs, names without Turkish or other special characters (e.g. OLCU rather than ÖLÇÜ) are the safest.
Layer setup step by step
01Create the layers
LAYER Wallcreates a new layer. You choose the current layer from the layer list on the ribbon; new objects are drawn on the current layer.02Assign colour, lineweight and linetype to the layer
Leave colour, linetype and lineweight on objects set to follow the layer; in the
COLORandLINETYPEcommands, the BYLAYER value follows the layer. For a custom lineweight on a particular object, useLINEWEIGHT, for exampleLINEWEIGHT 0.35.03Move objects on the wrong layer
Select by type and layer with
QSELECT;MATCHPROPapplies one object's layer, colour and lineweight to the selection.04Manage visibility
Use the buttons in the layer list to hide, freeze or lock a layer.
LAYISOhides the layers outside the selected objects;LAYONturns them all back on.05Set the room sources
Use
ROOMLAYERSto make sure furniture layout, grid line and title block layers are not counted as room boundaries.06Clean up
Before submission,
PURGEdeletes unused layers; layer 0 is not deleted.
To see lineweights on screen, type LWDISPLAY ON; this setting changes only the display, and the saved lineweights and output stay the same.
Layer, selection and property commands
| Turkish | Command | Alias | What it does | Example |
|---|---|---|---|---|
| özellik eşle | MATCHPROP | MA | Apply the source object's layer, colour and lineweight to the selection | MATCHPROP 3 |
| katman ayır | LAYISO | — | Hide layers outside the selection; the previous visibility is kept in the history | LAYISO |
| tümünü göster | LAYON | — | Make all layers visible | LAYON |
| boş katman sil | PURGE | PU | Delete only unused layers other than 0 | PURGE |
| hızlı seçim | QSELECT | QS | Dialog for selecting by type and layer | QSELECT |
| katman, katman özellikleri | LAYER | LA | Create a layer; the current layer is chosen in the interface | LAYER Wall |
| renk | COLOR | COL | Change the colour of the selected objects or of new objects; BYLAYER follows the layer | COLOR #22D3C5 |
| çizgi kalınlığı | LINEWEIGHT | LW | Change the lineweight in mm of the selected objects or of new objects | LINEWEIGHT 0.35 |
| — | LINETYPE | LT | Change the linetype of the selected objects or of new objects; BYLAYER follows the layer | LINETYPE DASHED |
| tümünü seç | SELECT | SEL | Select visible, unlocked objects; example of selecting by ID: SELECT 3 7 | SELECT ALL |
| — | LWDISPLAY | LWT | Show or hide lineweights on screen; saved lineweights and output are unchanged. | LWDISPLAY ON |
| özellikler | PROPERTIES | PR | Show the properties of the selected object | PROPERTIES |
| — | SELECTALL | — | Select visible unlocked objects | SELECTALL |
Frequently asked questions
Objects on a locked, hidden or frozen layer cannot be selected or edited. Unlock the layer or turn it on from the layer list.
The drawing layer must be visible and unlocked. If the current layer is hidden, frozen or locked, turn it on first or make another layer current.
The PURGE command deletes only unused layers; layer 0 and layers with objects on them are kept.
Yes. Layers come across when a DWG is imported; when exporting to DXF, layer names, colours, lineweights, and lock and visibility states are kept.