Short answer
An interior furniture layout plan shows the position and size of furniture, fittings and fixed elements on the existing architectural plan. You start with an accurately scaled underlay, place the furniture with blocks on a separate layer, check the clearances, and put the plan on a sheet with its dimensions and notes. In ARCTE CAD you do this with layer, block, array and dimension commands, and produce the presentation as a PDF or PNG.
Furniture layout plan step by step
01Prepare the underlay
Open the architectural plan as DWG or draw it from a measured survey. Verify the unit by measuring a known door width with
DIST.02Separate the layers
Create a FURNITURE layer for furniture, a FITTINGS layer for fixed fittings and a TEXT layer for notes; lock the underlay layers. Details: layer setup.
03Protect the room boundaries
Use
ROOMLAYERSto keep the furniture layer out of the room boundaries; net areas are not affected by furniture lines.04Place the furniture
Add ready-made items from the app's furniture catalogue (0.9.23 and later, 328 items); define items not in the catalogue once as a block and place them with
INSERTby giving a point and angle. UseALIGNto set items against a wall andARRAYfor repeated layouts.05Check the clearances
Measure the gaps between furniture with
DIST; the table below gives starting values.06Add dimensions and notes
Give critical dimensions with
DIMLINEARand material and product notes withMLEADER.07Produce the sheet
Export a 1:50 vector PDF for construction and PNG or SVG for the client presentation.
Common starting dimensions
| Item | Typical dimension | What to check |
|---|---|---|
| Main circulation (corridor) | at least 90–120 cm | Door swings should not narrow the passage |
| Around the bed | at least 60–70 cm | Passage with the wardrobe door open |
| Around the dining table | 75–90 cm behind the chair | Widen it if people need to pass behind |
| Kitchen worktop depth | 60 cm | At least 100–120 cm between facing worktops |
| Double bed | 160 × 200 cm | Allowance on both sides for bedside tables |
| Sofa to coffee table | 40–45 cm | Distance for sitting and stretching out |
These values are general design conventions; accessibility, fire and regulatory requirements vary by project and must be checked against them.
Preparing it for presentation
- Use hatches to convey materials (
HATCH) and send them to the back withDRAWORDER. - Leave the room names and areas on the plan; this is the clearest information for the client.
- Keep dimensions and notes simple on the presentation sheet and complete on the construction sheet.
- Visualisation (rendering) is outside the scope of ARCTE CAD; you can add the 2D plan to a presentation as PNG or SVG.
Frequently asked questions
It is drawn at 1:1 in CAD; the construction sheet is usually prepared at 1:50, and enlarged wet room or kitchen plans at 1:20.
Not if you keep the furniture layer out of the room boundaries with ROOMLAYERS; the net area is calculated from the walls.
You can view your plan in a 3D model linked to the plan with ARCTE UP (early access). Rendering and 3D visualisation are outside the scope of ARCTE CAD.