Short answer
A measured survey is the process of taking the dimensions of an existing building on site and drawing it as plans, sections and elevations. On site, the side lengths, diagonals, wall thicknesses and openings of each space are written on a sketch; back in the office, these dimensions are transferred to CAD at real size. In ARCTE CAD you enter walls with coordinates and thickness, check diagonals with the `DIST` command and measure room areas.
On site: how do you take measurements?
01Draw a sketch
Draw a freehand sketch of each floor, not to scale but in proportion; number the spaces.
02Measure the sides
Measure the wall lengths of each space from inner face to inner face and write them on the sketch. A laser measure gives speed and accuracy.
03Measure the diagonals
Spaces are rarely exactly square. Measure the two diagonals of each space; they are the only reliable way to close the plan correctly.
04Take the wall thicknesses
Measure the thicknesses at door and window openings; on external walls, note the plaster and insulation too.
05Measure the openings
Record the width, height, sill height and distance from the corner of doors and windows.
06Measure the levels and ceiling
Record floor levels, ceiling height, beams and drops; support them with photos.
Write all measurements in a single unit, millimetres or centimetres. The most common mistake in a measured survey is mixing units.
In the office: transferring the measurements to a plan
01Choose a starting corner
Start from the straightest and longest external wall; put its corner at point 0,0.
02Draw the walls at real size
Enter coordinates and the thickness in mm, e.g.
WALL 0,0 6250,0 250. Continue from the previous point with relative coordinates (@).03Close with the diagonal
At corners that are not square, two sides and the diagonal form a triangle: draw the lines and check with
DISTthat they match the diagonal you measured. If there is a mismatch, plan to measure again.04Place the openings
Put the doors and windows on the walls with
KAPI 900andPENCERE 1400(the Turkish command words for door and window).05Measure the rooms
Check the wall junctions with
AUDIT, then write the room names and net areas withROOM.06Add dimensions
Give internal dimensions with
DIMLINEARand angled walls withDIMALIGNED; a measured survey sheet is usually prepared at 1:50.
If you have a DWG survey
If you have received a measured DWG survey, choose the source unit correctly when opening the file and verify a known dimension with DIST. You can convert single-line walls to wall objects with WALLFROM and double-line walls with WALLPAIR; in suitable plans, DWGNATIVE converts them to walls, doors and windows. For details, see the guide How do you open a DWG file?.
Frequently asked questions
A measured survey is the drawing of an existing building's current state as plans, sections and elevations, based on measurements taken on site. It is the starting document for alteration, restoration and interior architecture projects.
Walls are often not exactly square. Because two sides and a diagonal define a triangle exactly, diagonals make sure the plan closes correctly.
The drawing is made at 1:1 in CAD; the sheet is usually prepared at 1:50, or 1:100 for large buildings. Check the scale required by the authority.