Short answer
The title block is the information block, usually in the bottom right-hand corner of the sheet, that shows the project name, the sheet title and number, the scale, the date, who drew, checked and approved it, and the revisions. ARCTE CAD has no ready-made title block template; you build the title block once with the rectangle, table and text commands, store it as a block and reuse it by copying in later projects.
What goes in a title block?
| Field | Example |
|---|---|
| Project name and location | Housing project, block/parcel details |
| Client | Client's name or company name |
| Sheet title | Ground floor plan |
| Sheet number | M-101 |
| Scale | 1:50 |
| Date | The sheet's issue date |
| Drawn, checked, approved | Name and signature fields |
| Project author / practice | Practice name, registration or chamber details |
| Revision table | Revision no., date, description |
For building permit and public projects, the title block layout and mandatory information may be set by the relevant authority or professional chamber; check the required title block sample before submission.
Building a title block in ARCTE CAD
01Create a TITLEBLOCK layer
Create a separate layer with
LAYER TitleBlock; give the border a distinct lineweight such as 0.35 mm.02Draw the border
Draw the border with
RECTANG, subtracting the margins from the paper size. Enlarge the border according to the output scale: on a 1:50 sheet, if the inner size of an A3 border is about 400 × 277 mm, it becomes 20000 × 13850 mm in the drawing.03Build the information table
Set up the rows and columns with
TABLE; enter the content in one go by separating columns with | and rows with ;:TABLE 0,0 6 2 4000 700 "Project|…;Sheet|Ground floor plan;Scale|1:50". A table can have at most 40 rows and 20 columns.04Update the cells
TABLECELL 3 2 1:100changes the cell in row 3, column 2; empty text clears the cell.05Logo and text
Add the practice name with
TEXTor multiline text (MTEXT).06Store it as a block
Define the border and title block lines with
BLOCK TitleBlock-A3 0,0; keep the variable information (sheet title, date) in table cells. Carry it over to later projects withCOPYBASEandPASTECLIP.
The table is not a spreadsheet: it does not calculate formulas and consists only of editable text.
Keeping track of revisions
- For each revision, add a new row to the revision table in the title block: number, date and a short description.
- Mark the changed area on the plan with a leader (
MLEADER) and the revision number. - The sheet number stays the same; the revision letter or number changes (e.g. M-101 Rev. B).
- Name each PDF you send with its revision number and archive it.
Frequently asked questions
It is the information block, usually in the bottom right-hand corner of the sheet, that shows the project name, the sheet title and number, the scale, the date, who drew and approved it, and the revisions.
No. You can build the title block once with the rectangle, table and text commands, store it as a block and copy it into later projects.
The common practice is the bottom right-hand corner; on folded sheets, it is placed so that it appears on top when the sheet is folded.