Short answer
To output a sheet, you set the paper size (A4–A0), orientation, plot area, scale (e.g. 1:50) and margins in the layout, check it in print preview and export it as a vector PDF. ARCTE CAD can publish several sheets at once as a multi-page PDF; if a dimension or area is out of date, it stops the output so that no wrong sheet is produced.
Print settings
| Setting | Options | Tip |
|---|---|---|
| Paper | A4, A3, A2, A1, A0; landscape or portrait | If you will plot it, check that the plotter supports the paper size |
| Plot area | Layout, Extents (whole drawing), View (model screen), Window (selected area) | Use Layout for sheets |
| Scale | Fit to paper, 1:1, 1:10, 1:20, 1:50, 1:100, 1:200, 1:500 or custom | Do not choose "Fit to paper" for a scaled sheet |
| Margins | Left, right, top, bottom (mm) and offset | If the margins leave no drawing area, no output can be produced |
Vector PDF step by step
01Switch to the layout
Switch to the Layout tab below the drawing area. The layout must have at least one visible viewport.
02Set up the page
Use
PAGESETUPto choose the paper, plot area, scale and margins.03Preview
Use
PLOTPREVIEWto check lineweights, the legibility of text and that the sheet fits the paper.04Produce the PDF
Create a vector PDF with the
PDFcommand. For several sheets,PUBLISHpublishes the selected sheets as a single multi-page PDF (1–128 pages).
The PDF is vector: lines do not blur when you zoom in, and the scale is preserved. To check the printed scale, it is good practice to put a scale bar or a dimension of known length on the sheet.
Common output problems
| Message or symptom | Cause | Solution |
|---|---|---|
| "Output stopped: there is an out-of-date dimension/area" | The geometry changed; a linked dimension or area is not up to date | Fix the objects listed by RELATIONS and produce the output again |
| "PDF requires at least one visible viewport" | There is no viewport in the layout, or it is hidden | Add a viewport to the layout |
| "PDF margins leave no drawing area on the page" | The margins are too large | Reduce the margins |
| Turkish character or font error | Windows fonts (Arial, Times New Roman, Courier New) are missing or corrupted | Repair the fonts or use Print > Microsoft Print to PDF |
| Lines too thin or too thick | Layer lineweights do not suit the scale | Review the layer lineweights (LINEWEIGHT) and check in the preview |
For other messages, see the troubleshooting page.
Frequently asked questions
"Fit to paper" may be selected as the scale. In page setup, choose a fixed scale such as 1:50 or 1:100 and use Layout as the plot area.
Yes. PUBLISH publishes the sheets you select as a single multi-page PDF.
A PDF is for sharing and printing, not editing. If the drawing will be edited in another CAD program, export it as DXF.