Short answer
DXF (Drawing Exchange Format) is a documented exchange format used to move CAD drawings between different programs; DWG is AutoCAD's closed, binary native format. ARCTE CAD exports your drawings as text DXF compatible with AutoCAD 2007 (AC1021) in millimetres; it also imports text DXF files of up to 25 MB.
The difference between DXF and DWG
| DXF | DWG | |
|---|---|---|
| Structure | Documented exchange format; mostly text | Closed, binary native format |
| File size | Larger | Smaller |
| Purpose | Exchange between programs | Working file |
| In ARCTE CAD | Text DXF opens and can be exported as DXF | Opens (at most 32 MiB for editing); not saved as DWG |
In short: use DXF to send your drawing to a partner who works with DWG in a form they can edit, and PDF for approval and printing.
Exporting to DXF from ARCTE CAD
01Fix out-of-date dimensions and areas
If there is an out-of-date dimension or area, the DXF export is stopped; check the
RELATIONSlist.02Check the layer names
Layer names must not contain the characters < > / \ " : ; ? * | =.
03Export
Type
DXFor use the DXF button on the ribbon.
| Property | How it appears in DXF |
|---|---|
| Version and unit | AutoCAD 2007 (AC1021), millimetres ($INSUNITS = 4), UTF-8; Turkish characters are preserved |
| Layers | Name, colour, lineweight, lock and visibility |
| Lines, polylines, circles, arcs, ellipses, text | As objects of the same type |
| Walls, doors, windows | Converted to lines and arcs (not architectural objects in the receiving program) |
| Dimensions | As lines and text (not DIMENSION objects) |
| Blocks | As exploded geometry (the block definition is not exported) |
| Hatches | As HATCH |
DXF does not carry the relationships in ARCTE CAD (doors linked to walls, associative dimensions and areas). The file you keep working on is always the .arc project.
Opening a DXF file
- Only text (ASCII/UTF-8) DXF opens; for binary DXF, save it as text DXF in the source program.
- The file can be at most 25 MB.
- Objects read: lines, polylines (LWPOLYLINE and 2D POLYLINE), circles, arcs, ellipses, hatches, TEXT and MTEXT; layer and text style tables.
- Other objects (e.g. block insertions, dimensions, 3D objects) are skipped, and you are told how many were skipped.
- The unit is converted to millimetres from the $INSUNITS value in the file (mm, inch, ft, cm, m); if there is no unit, mm is assumed and a warning is given.
- If the source font cannot be found or is SHX, text is shown in Segoe UI.
For files containing blocks and dimensions, opening the DWG directly gives better results: How do you open a DWG file?
Common DXF messages
| Message | Solution |
|---|---|
| "Only text (ASCII/UTF-8) DXF is supported." | Save the DXF as text (ASCII) in the source program |
| "DXF exceeds the 25 MB limit." | Purge unnecessary layers and objects and save again, or open it as DWG |
| "Unsupported DXF unit code" | Export the source file in mm |
| "… not supported; skipped." | Convert the skipped objects to lines and text in the source program, or open the DWG |
| "Remove special characters from the layer name for DXF" | Rename the layer named in the message |
Frequently asked questions
No. DWG is AutoCAD's closed native format; DXF is a documented exchange format for moving drawings between programs. Most CAD programs open both.
The DXF is written to be compatible with AutoCAD 2007 (AC1021), in millimetres; AutoCAD and other programs that support DXF can open this version. Walls and dimensions go across as lines and text.
No. Only text (ASCII/UTF-8) DXF is supported; save it as text DXF in the source program.
ARCTE CAD writes DXF as UTF-8; AutoCAD 2007 and later read Turkish characters correctly.